![]() |
![]() ![]() |
![]() |
![]()
Post
#1
|
|
Grupa: Zarejestrowani Postów: 3 Pomógł: 0 Dołączył: 18.06.2004 Ostrzeżenie: (0%) ![]() ![]() |
Jak w temacie mam php 4.2.3 i chce dołożyć GD wersji 2.xx system linux, jak tego dokonać?
![]() Ten post edytował Kres 18.06.2004, 20:28:34 |
|
|
![]()
Post
#2
|
|
![]() Developer Grupa: Moderatorzy Postów: 2 844 Pomógł: 20 Dołączył: 25.11.2003 Skąd: Olkusz ![]() |
Prosze:
Click |
|
|
![]()
Post
#3
|
|
Grupa: Zarejestrowani Postów: 3 Pomógł: 0 Dołączył: 18.06.2004 Ostrzeżenie: (0%) ![]() ![]() |
Duzo tego, a moze bardziej szczegolowo co zrobic?
Czy np. wystarczy path do php 4.2.3( którego uzywam)? INSTRUCTIONS (Please Follow Carefully) Step One: download and install gd 2.0.8 or better. See the gd manual if you have questions about this step. Step Two: download the php 4.2.3 source distribution. You have probably done this already. (If you can use a newer version of php, then DON'T USE this patch at all. See the message at the top of this page.) Step Three: download the patch file, php-4.2.3-gd-2.0.8.patch, and save it to the directory where you saved the php source distribution. I recommend right-clicking on the above link and selecting the "save target as" option. Step Four: untar the php distribution, if you have not already done so, and cd to the php-4.2.3 directory. Step Five: type this command: patch -p1 < ../php-4.2.3-gd-2.0.8.patch Step Six: type ./configure, make, make install, etc. as you would normally do for php. In my experience, you will probably have to specify --with-gd=/usr/local, --with-png-dir=/usr/local, and --with-zlib-dir=/usr/local at a minimum to get configure to notice that gd is available, but your mileage may vary. Step Seven: enjoy! The new imagecopyrotated function is similar to imagecopyresized, except with slightly different arguments: dstImage, srcImage, dstX, dstY, srcX, srcY, srcWidth, srcHeight, angle. Note that the destination X and Y coordinates specify the center of the rotated version of the source rectangle. Also note that the angle is specified as an integer number of degrees (0-359). |
|
|
![]()
Post
#4
|
|
![]() Grupa: Zarejestrowani Postów: 405 Pomógł: 1 Dołączył: 19.09.2003 Skąd: Lublin Ostrzeżenie: (0%) ![]() ![]() |
Na stronie, którą podał Ci hwao masz wyraźnie napisane:
Cytat To enable GD-support configure php --with-gd[=DIR], where DIR is the GD base install directory. Czyli musisz napisać: Kod ./configure --with-gd=/path/to/gd Oczywiście musisz dodać również wszystkie inne opcje z którymi wcześniej kompilowałeś php. -------------------- Rozwój cywilizacji informatycznej to wyścig między programistami, którzy wytwarzają coraz łatwiejsze
programy użytkowe dla idiotów, a światem produkującym coraz lepszych gatunkowo idiotów. Blog: Małolepszy.info |
|
|
![]() ![]() |
![]() |
Aktualny czas: 21.08.2025 - 03:29 |